- Alter: 2735 Tage

3D printing at IDS (International Dental Show) in the year 2017: An introduction to the future

Design using additive methods - flexibility for complex structures - in-house production and outsourcing - a focal topic of IDS 2017

Since the 1990s, when the first non-precious metal bases were produced using 3D printing methods, the 3D printing technology has established itself as a modern production process. Today various plastics are also available as high-performance materials. Many users are already considering supplemental extensions and thinking about investing in this technology - the International Dental Show (IDS) in Cologne from 21 to 25 March 2017 will provide an overview. 3D printing is an additive production  process - contrary to subtractive methods, for example computer-controlled milling or grinding ceramics or the machining of non- precious metals or titanium. However, many analogies can be discovered and used as advice when one is considering implementing 3D printing. Familiar and established in the dental technology field First of all, one has to be aware that additive manufacturing is a trusted method. Ordering dental technology items that have been industrially produced using the 3D printing technique has been common for many years. Among  others, one is familiar with selective laser melting, selective laser sintering (SLS), direct metal laser sintering (DMLS) or lasercusing: Here crowns, bridges and denture bases ("digital model casting bases") are made out of non-precious metal dental alloys. Non-precious metal powder layers are applied and are briefly melted onto the defined places with a laser beam in using a high amount energy. In this way following a construction plan, which was created on the monitor for example using the CAD process, high-precision dental technology items are produced. Stereolithography is a further, very familiar 3D printing method. Models, splints and drilling templates can be produced using this method. The principle is similar to laser sintering, however whereas in the latter the applied material is melted on layer by layer, in the case of stereolithography the light polymerisation of plastic is implemented. In order to be able to assess the 3D printing method more efficiently in future, it is worth taking a look at the early zirconium oxide technology. Initially large industry machines produced dental technology items and the laboratories were able to order them from external service providers. Later, in-house production also became attractive. In this way, a combination between central manufacturers, cooperative laboratories that carried out contract manufacturing for other laboratories in order to exploit their own systems to the full and laboratories that offered round-the-clock own production, who also additionally outsourced parts of the production, established itself. Currently, some laboratories are asking themselves about the optimal implementation of 3D printing: Drilling templates, different splints, dental technology models, individual impression trays and plastic base casts for the metal cast depict the most frequent indications. Whether they are ordered from an external service provider or produced in one's own firm, is determined by the amount of the orders to be expected and the speed required by the customer, where own manufacturing principally allows immediate production. IDS 2017 shows which technologies are available and how to invest in them - and thus facilitates an individual economical calculation. The extended range of printing methods In addition to the methods already mentioned, among others the so-called multi-jet technology (detailed work up to precisely 16 micron), the fused layer techniques (fused deposition modelling, FDM; fused filament fabrication, FFF) and the mask exposure method prove to be interesting. The multi-jet technology works following the principle of the "inkjet printer". For example, (almost) two-dimensional layers of powder are rolled out and then imprinted with bonding agents - exactly on the places where the dental technology item belongs according to the construction plan (= virtual model), the non-bonded power can be simply removed. The material used is either glass or metal powder, whereby with today's current state of technology only the metal powder is suitable for the production of solid objects, because to this end after the printing process, a sintering and an infiltrating step to fill up existing cavities have to subsequently be carried out. Alternatively, one prints (once again almost) two- dimensional photopolymers according to the construction plan and lets them harden so that the item is formed layer by layer. Using the layer melting technique one extrudes for example waxes or plastics out of a nozzle or applies the material drop by drop, once it cools down it solidifies - then the next layer can be applied. Finally, the mask exposure method works similar to the well- known stereolithographical technique. The decisive difference: Instead of using a laser, the plastic is hardened with the aid of a UV LED lamp. Printing of tooth-coloured table tops and temporaries One of the big hopes for dental 3D printing is the optimised colouration of materials, for example of high-performance plastics. The experiences of the subtracting methods have proven that zirconium oxide has initially only been implemented with a veneer covering. More recent versions with a higher translucency are on the other hand used monolithically. When today complete dentures are produced digitally in a working step in the laboratory and the tine-consuming procedure is limited down to two dentist appointment for the patient: why not printed table tops and temporaries soon too? Case studies are already showing now: An implant-supported top jaw complete denture can indeed be made out of PEEK (polyether ether ketone) using the 3D printing technique and plastic veneers lend it an attractive appearance. PEKK (polyether ether ketone) could also become one of the base materials of the future, especially since in combination with a veneer composite it displays similar characteristics to veneered zirconium oxide. Digital workflows make 3D printing additionally attractive In addition to new materials, the possibility of integration in the digital worlds also provides a boost. For example, the 3D printing of dental technology models could develop into a frequently used option as a result of the further distribution of intraoral scanners. "3D printing offers extraordinary potential," said Dr. Martin Rickert, Chairman of the Association of the German Dental Manufacturers e.V. (VDDI) convinced. "This also applies to the closer collaboration between the dentists and the dental technologists, which will be promoted through the joint work in the digital workflows. The backward planning in implantology is an example of this, where 3D printing creates a concrete additional option in the form of the production of detailed drilling templates at the laboratory. At the International Dental Show in Cologne, the opportunities of this modern production technology can be experienced close-up - with tangible innovations and in direct contact to the respective manufacturers." The IDS (International Dental Show) takes place in Cologne every two years and is organised by the GFDI Gesellschaft zur Förderung der Dental-Industrie mbH, the commercial enterprise of the Association of German Dental Manufacturers (VDDI). It is staged by the Koelnmesse GmbH, Cologne. 100 years of VDDI The VDDI is celebrating its 100th anniversary in 2016. It was founded as the Association of German Dental Manufacturers on 24 June 1916 and organised the first Dental Show in 1923. In 1928 the VDDF organised the first International Dental Show. Today the VDDI has 200 member companies with 20,000 employees. The overall turnover is more than Euro 5 billion with an export share of 62 percent. More information on the anniversary can be found at

Opens external link in new window100.vddi.de

Your contact in case of queries: Burkhard Sticklies,

Opens window for sending emailSticklies@vddi.de

  Note for editorial offices: IDS Cologne photos  are available in our image database on the Internet at www.ids- cologne.de in the “Press” section. Press information is available at: 

Opens external link in new windowwww.ids-cologne.de/pressinformation

If you reprint this document, please send us a sample copy.

Further news

Brushing one's teeth correctly is the crux of the matter - COVID-19 has given mouthwashes a boost with the help of surveys - The special area…

Over 850 exhibiting companies have already confirmed their participation at IDS 2023